EasyWash rinsers allow you to rinse bottles and jars of different sizes internally. The machines can be supplied in two or four nozzle version, with or without electric pump.
 TECHNICAL SPECIFICATION
- Productivity : up to a maximum of 600 bottles/hour, depending on the operator
- Dimensions: 500x800; H = 1200 mm, Weight: 45 kg
- Power: 0.55 KW
- Standard Injector Mouth Internal Diameter: 12 to 26 mm
- Minimum standard injector container height: 150 mm
- Internal diameter of the mignon injector mouth: 7.5 to 26 mm
- Minimum mignon injector canister height: -
- Jar injector - Internal mouth diameter: 12 to 140 mm
- Minimum height of the jar injector container: -
 Available Models
- with 2 injectors
- with 4 injectors
- with electric pump
- without electric pump
- Pneumatic pump
Accessory kits available
- mignon injectors
- jar injectors
Frequently Asked Questions
- Is the stainless steel skirt visible in the photo included in the supply?
Yes, it is the container for the sanitizing solution. - When is it recommended to use the air pump of the rinser, instead of the electric one?
We recommend using the pneumatic pump when distilled packaged and/or whenever ethyl alcohol is used to clean or sanitize bottles. - What is the difference between a recirculation pump and a single-use pump rinse? Why choose one or the other?
In the rinsing device with recirculation pump, the sanitizing solution (water and chemical agent) is recirculated, thus the same amount of water is used for a larger number of bottles. If the use of chemical agents is not desired, we can supply the version with disposable water, i.e. without recirculation pump, with direct connection to the water network - in this case the used water is discharged after each use. - Can I also use EasyWash rinsers with plastic or pet bottles?
It is always necessary to check with a few glass samples, as some low or very light density plastics might deform during processing.
Manufacturer: TENCO srl - Italy
